Tunnel Resin Line

Product Code : 4

Product Information

It is a fully insulated tunnel oven tower that provides facilities for drying or polymerization of slabs. The oven is heated by means of electric-driven recirculation fans that keep the temperature constant in order to achieve an optimum slab drying and a good resin polymerisation. It consists of three units that can carry two separate slab trays. In addition, a 3 m-application bench is integrated to these units. All the units are double storeys, the bottom for drying of slabs, and the top for curing. The heating system works with the same way as in the multistorey ovens. The prevalent tunnel ovens work with heating coils, which overheat the upper face slabs, which result in ineffective epoxy application. In ION tunnel ovens, the heating is provided with heated air, which circulates the entire slab and provides constant heating at desired temperature. The temperature inside the oven is constantly controlled. The humidity inside the tunnel oven is measured in various locations with the help of a hygrometer and excess moisture is exhausted. It is controlled with PLCs, inverters and sensors.

Technical data

Machinable slab width              mm         2000

Machinable slab length             mm         3000

Installed heating power        kW        96

Slab storeys                                Nr.        2 

Installed electrical power           kW        130

Heating coil power kW         2

Heating coils in a group         Nr.          16

Group of heating coils     Nr.         3

Fan power                                     kW         3

Fan flowrate                     m3/s       6000

Machine length (L) mm         23900

Machine width (W)         mm         2800

Machine height (H)         mm         2457

Approximate mass         Kg         8500

You May Also Like

Special Offer
Block Room
Special Offer
Slab Tray